The performance of your air conditioner is, in part, based upon the installation process. You may have purchased one of the better AC units, but you may have noticed that it is not performing as it should. There are problems that can occur over time, but this is usually with older models. If you have recently had one installed, and it is not functioning properly, it is likely the result of the installation that was done by the professionals that put it in your home or office. The following problems may occur if the installation process went wrong if you have recently purchased an AC unit.
Why Does The Installation Process Matter So Much?
Most people that have a window unit are not going to have to worry about this. There are only a few problems that can occur. It is the larger units, entire HVAC systems that are designed to provide cold air throughout an entire office complex, that often have the most problems. If not done properly, you may notice that you only have warm air blowing instead of cold air, something that can be inconvenient on a hot day. Whether you do this yourself, or if this is done by a professional HVAC company, there are certain problems that can occur during the installation.
Why A Proper Installation Is So Essential
There are several reasons why having a proper installation is so essential with AC units. First of all, it can reduce the overall cost of repairs in the future. Second, it can improve your overall comfort. If it is done properly, then you can expect cold air blowing out from that day forward. Safety is another reason that the installation process should be successful. If there are components that are not installed the right way, this could lead to extensive problems with the compressor, condenser, or may even lead to becoming a fire hazard. You can also have carbon monoxide leaks, and a multitude of other issues, all related to a poor installation.
Common Problems Resulting From A Bad Installation
These problems are going to be associated with a number of different types of AC units. Assuming that you have a larger unit that is providing cold air throughout your entire complex, a ducting system can cause problems if it is not properly installed. There could be problems associated with each portion of the ducting. If it is not connected properly, the cold air could be blowing into other areas of your building. If the AC unit itself is not installed properly, then the different parts of the air conditioning unit may not function the right way. There needs to be a connection between the compressor, condenser, and the evaporator coil for everything to work smoothly.
How To Know If You Have Problems Based Upon The Installation
Many of the problems that you will notice will be attributed to specific components of the AC unit. For example, if the compressor is not installed properly, it may not be able to compress the refrigerant enough in order to absorb the heat in the air. If the evaporator coil is not functioning, the entire circulation process of the coolant from a liquid to a gas will be interrupted. Finally, if there is a leak in the system which allows the refrigerant from Bluon Energy to come out, you could overheat your compressor, as well as your condenser coil, leading to what could become a fire hazard.
Ways To Make Sure That Your Installation Is Properly Done
If your installation is done the right way, you will likely know immediately. For example, the air is going to be cold very quickly. It will also blow cold air consistently, and once it reaches a certain temperature in your office or building, it will then shut off. This will indicate that the compressor is working, and the amount of coolant in your system is at appropriate levels. Likewise, the thermostat will be functioning if you set it to a specific temperature, and it is able to reach that temperature in a reasonable amount of time. However, if the AC unit does not ever get there, or if it never stops running, then this would indicate there is either a component problem or an installation issue that needs to be resolved. That’s why evaluating the HVAC companies that will do this for you is so important. You need to know that they have done this many times before. They may have reviews online from customers that are raving about their services. These are all indications that you should consider using that particular company.
How To Find HVAC Companies To Repair Bad Installations
If you do have a bad installation, then you need to consider finding an HVAC company to do the repairs. It is likely that you will not contact the company that originally put this in, unless it is still under warranty. If the warranty has come and gone, you will need to do your research. This will help you find the best company for repairing HVAC systems. Based upon reviews, and perhaps recommendations from friends or colleagues, you can easily find the best business for the job. However, it all begins with finding a reputable company by which to do the installation the right way the first time. This will allow you to avoid expensive repairs in the future, and also enjoy cool air when you need to use your HVAC system that is installed at your home or office.
To avoid any of the problems that have been listed due to a poor installation of an HVAC system, always be on the lookout for the top businesses. Look for reviews on these companies, and also be aware of the problems that can occur so that you can call someone to fix the problem. By avoiding incompetent businesses, and getting regular maintenance on your system, you will not have to deal with many of the problems associated with HVAC installations that have been done improperly.